Caliber L4-2.0L (2008)
Trim Panel: Service and Repair
Pillar Trim
A-Pillar Trim Panel-Removal
REMOVAL
1. Using special tool C-4755, remove plug (1) from A-pillar.
2. Remove screw.
3. Remove A-pillar trim.
A-Pillar Trim Panel-Installation
INSTALLATION
1. Insert A-Pillar trim bottom first ensuring trim has seated into clips.
2. Install screw.
NOTE: It is very important to insert small tab of plug into small trim opening.
3. Insert plug bottom first (2) into trim opening.