Caliber L4-2.0L (2008)
Removal
REMOVAL
1. Remove lower B-pillar trim from B-pillar (5).
2. Remove plug.
3. Remove screw (3).
4. Remove trim (1) by pulling tab (2) on top outward.
Installation
INSTALLATION
1. Install B-pillar (1) trim to B-pillar (5) by inserting B-pillar trim tab (2) into B-pillar slot.
2. Push B-pillar trim into position ensuring bottom clip (4) has seated.
3. Add screw (3) and reinstall plug.
C-Pillar Trim Panel-Removal
REMOVAL
