Caliber L4-2.0L (2008)
3. Remove six speaker fasteners.
4. Disconnect speaker wire from harness.
W/Out Speaker
INSTALLATION
1. Align lower liftgate trim tabs (4) with liftgate holes.
2. Hand tap liftgate panel ensuring liftgate tabs are properly seated.
3. Install liftgate screws (2) into liftgate nuts (1).
4. Install upper side molding.See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Upper
Side Molding/Installation
5. Install upper liftgate molding.See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Upper
Molding/Installation
W/ Speaker
INSTALLATION
