Caliber L4-2.0L (2008)
1. Remove lower quarter.
2. Remove lower seat anchors from seat belt opening (1).
3. Remove upper quarter by pulling on rear portion of upper quarter disengaging clips from metal holes in body (4).
4. Remove front lower portion (3) by pulling clip loose.
5. Slide quarter panel (2) downward and remove from vehicle.
C-Pillar Trim Panel-Installation
INSTALLATION
1. Pass seat belt anchors through trim openings (1).
2. Install quarter trim (2) by sliding hook at top and locating 4-way locator into the body side sheet metal holes (4).
3. Complete installation by aligning metal clips and snaping until properly seated.
Quarter Trim Panel - Removal
REMOVAL
