Caliber L4-2.0L (2008)
9. Separate the clip fasteners (2) and remove the side shields from the seat cushion frame tabs (1).
WARNING: Discard and replace the seat back bolts (1) with new bolts when servicing. Installing used bolts may result in the loosening of the
seat back bolts after repair. Failure to follow these instructions may result in serious or fatal injury.
10. Remove and discard the bolts (1) and remove the seat back assembly (2).
Passenger Seat
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Remove the seat cushion See: Seat Cushion/Service and Repair/Removal and Replacement/Seat Cushion - Removal.
3. Fold the seat back (1) into the down position.
