Caliber L4-2.0L (2008)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor - Installation
FRONT-WHEEL-DRIVE
1. Install the wheel speed sensor head (3) into the rear of the hub and bearing (2).
2. Install the wheel speed sensor head mounting screw (1). Tighten the screw to 10 Nm (89 in. lbs.).
3. Position the wheel speed sensor (3) on the trailing link (2) and install the screw (4) securing it in place. Tighten the mounting screw to 18 Nm (13
ft. lbs.).
4. Position the wheel speed sensor (3) and install the routing clip (1) fastening the sensor to the trailing link (2).