Caliber L4-2.0L (2008)
4. Remove the banjo bolt (3) connecting the brake flex hose (1) to the brake caliper (4). There are two washers (2) that will come off with the banjo
bolt. Discard the washers.
5. Remove the two brake caliper guide pin bolts (2).
6. Slide the disc brake caliper (1) from the disc brake adapter bracket (3) and pads, and remove from vehicle.
Front
INSTALLATION
1. Completely retract the caliper piston back into the bore of the caliper. Use a C-clamp to retract the piston. Place a wood block over the piston
before installing the C-clamp to avoid damaging the piston.
CAUTION: Use care when installing the caliper (4) onto the adapter bracket (1) to avoid damaging the guide pin boots.
2. Install the disc brake caliper over the brake pads on the brake caliper adapter bracket.
