Caliber L4-2.0L (2008)
1. Remove camshaftsSee: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal and Replacement/Camshaft - Removal.
2. Specification - clearance = change
3. Decrease bucket thickness by change figure.
4. Install camshafts See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal and Replacement/Camshaft - Installation.
5. Verify that valve lash is correct.
Clearance to Large
1. Remove camshaftsSee: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal and Replacement/Camshaft - Removal.
2. Clearance - specification = change.
3. Increase bucket thickness by change figure.
4. Install camshaftsSee: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Removal and Replacement/Camshaft - Installation.
5. Verify that valve lash is correct.