Caliber L4-2.0L (2008)
Timing Cover: Service and Repair
Timing Cover - Installation
INSTALLATION
NOTE: When using RTV, the sealing surfaces must be clean and free from grease and oil.
NOTE: When using RTV, parts should be assembled in 10 minutes and tighten to final torque within 45 minutes.
1. Clean all sealing surfaces.
2. Apply Mopar(R) engine sealant RTV (or equivalent) as shown at the cylinder head to block parting line (1,2).
3. Apply Mopar(R) engine sealant RTV (or equivalent) as shown at the ladder frame to block parting line (1,2).
