Caliber L4-2.0L (2008)
10. Remove the front seat from the side of the vehicle being serviced See: Body and Frame/Seats/Service and Repair/Seat - Removal.
11. Pull the carpet back to gain access to the rear seat floor duct (2) See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair/Carpet
- Removal.
12. Remove the screw (1) and disengage the retainer that secures the rear seat floor duct to the floor support (4).
13. Disconnect the rear seat floor duct from the rear floor distribution duct (3) and remove the rear seat duct(s).
