Caliber L4-2.0L (2008)
2. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
LEFT FRONT FLOOR DUCT
NOTE: Illustration shown with instrument panel removed for clarity.
NOTE: LHD model shown. RHD model similar.
3. Connect the left front floor duct (1) to the left side of the HVAC housing (2). Make sure the duct is fully engaged to the housing.
4. Install the screw that secures the left front floor duct to the left side of the HVAC housing. Tighten the screw to 2 Nm (17 in. lbs.).
5. On LHD models, install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Steering Column Opening Cover - Installation.
6. On RHD models, install the instrument panel cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Cover - Installation.
REAR FLOOR DISTRIBUTION DUCTS
7. Connect the left rear floor distribution duct (1) and the right rear floor distribution duct (2) as required to the HVAC housing (3). Make sure the
ducts are fully engaged to the housing.
8. Install the rear seat floor ducts.
9. Install the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel -
Installation.
REAR SEAT FLOOR DUCTS
NOTE: Right side rear floor duct shown. Left side duct similar.