Caliber L4-2.0L (2008)
3. Install the CVT fluid cooler onto the transaxle case.
4. Install and tighten the mounting bolts to 4 Nm (37 in.lbs.).
5. Install the coolant lines (1) at the cooler.
6. Install the transmission lines (2) at the cooler (3).
7. Install the left front splash shield.
8. Install the left front tire.
9. Lower the hoist.
10. Top off coolant See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
11. Top off transmission fluid See: Transmission and Drivetrain/Continuously Variable Transmission/Transaxle/Service and
Repair/Procedures/Transmission Fill.
