Caliber L4-2.0L (2008)
10. Remove the return hose routing clamp screw (2) securing the return hose (7) to the frame rail.
11. Lower the vehicle.
12. Remove the return hose routing clamp screw (1) securing the return hose (7) to the strut tower.
13. Remove the hose clamps (6) securing the return hose to the power steering reservoir and cooler. Slide the hose off the end of the cooler tube.
14. Remove the return hose from the vehicle.
Supply Hose - Gas Engine
GAS ENGINE
NOTE: Before proceeding, See: Steering and Suspension/Steering/Service Precautions.
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the clamp (2) securing the supply hose to the power steering pump (3) supply fitting, then remove the hose from the supply fitting.
