Caliber L4-2.0L (2008)
6. Remove driver airbag trim cover from driver airbag.
Installation
INSTALLATION
1. Place driver airbag into new driver airbag cover.
WARNING: Be careful not to pinch airbag cushion between latch hook mounting plate and cover.
2. Push down on the latch hook mounting plate (1) and guide the latch hooks (2) into the slots on the driver airbag cover (3).
3. Once all the latch hooks have been started, pull the driver airbag cover away from the driver airbag to fully seat the latch hooks.
4. Install the driver airbag See: Driver Airbag - Installation.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints
Verification Test
