Caliber L4-2.0L (2008)
5. Remove the bolt (4) attaching the turning loop to the belt height adjuster (2).
6. Remove upper B-pillar trim (3) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim and
lower B-pillar trim panels See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar Trim.
7. Using a trim stick or equivalent, gently pry the seatbelt webbing guide from the B-pillar (1).
8. Remove anchor bolt (6) from lower B-pillar (1).
9. Disconnect electrical connectors. One is for the tensioner squib (2) and the other is for the seat belt switch (3).
10. Remove front seat belt retractor (1) from vehicle.