Caliber L4-2.0L (2008)
Sunroof / Moonroof Switch: Service and Repair
Control Switch
Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the courtesy/reading lamp lens (5). Insert a suitable flat bladed tool into the slot (6) in the courtesy/reading lamp assembly (2). Pivot the
lens down and to the left to release the holding tab (4).
3. Using a suitable flat bladed tool, release the mounting tabs (5) from the sides of the sunroof control switch (4) and pull the switch down from the
courtesy/reading lamp assembly (2).
