Caliber L4-2.0L (2008)
or outward using an appropriate prying tool. Do not tighten at this time.
4. Lower the vehicle.
5. Position the vehicle on an alignment rack/drive-on lift. Raise the vehicle as necessary to access mounting bolts and nuts.
6. Tighten the toe link mounting bolt at the trailing link to 95 Nm (70 ft. lbs.).
7. Perform wheel alignment as necessary. See: Alignment/Service and Repair
8. Once rear toe is set, while holding the cam bolt head (3) stationary, tighten the toe link mounting cam bolt nut (1) to 35 Nm (26 ft. lbs.).
