Caliber L4-2.0L (2008)
4. Lower the vehicle.
5. Position the vehicle on an alignment rack/drive-on lift. Raise the vehicle as necessary to access mounting bolts and nuts.
6. Tighten the toe link mounting bolt at the trailing link to 95 Nm (70 ft. lbs.).
7. Perform wheel alignment as necessary. See: Alignment/Service and Repair
8. Once rear toe is set, while holding the cam bolt head (3) stationary, tighten the toe link mounting cam bolt nut (1) to 35 Nm (26 ft. lbs.).
Front Lower Control Arm - Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Front Suspension.
1. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
