Caliber L4-2.0L (2008)
2. Install the mounting bolt (1) and nut (3) fastening the shock assembly (2) to the lower control arm (4). Do not tighten at this time.
3. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
4. Lower the vehicle.
5. install the two nuts (1) securing the shock assembly (2) to the body bracket (3). Tighten the mounting nuts to 48 Nm (35 ft. lbs.).
6. Install the interior rear quarter trim panel. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel
