Caliber L4-2.0L (2008)
5. Disconnect the pushrod (3) at the clutch pedal.
6. Disconnect hydraulic supply tube at clutch master cylinder by pulling retaining clip (5) then pulling out on tube. To completely drain clutch master
cylinder and tubing, remove brake master cylinder cap band drain fluid into suitable container.
7. Disconnect clutch master cylinder supply line from brake master cylinder reservoir (1). Cap off or collect fluid spillage from reservoir port.
CAUTION: Use care when removing clutch master cylinder from engine compartment. Aggressive handling can result in a damaged
hydraulic tube and improper clutch release operation upon reassembly.
CAUTION: Brake fluid will damage painted surfaces. If brake fluid is spilled on any painted surfaces, wash it off immediately with water.
