Caliber L4-2.0L (2008)
Seals and Gaskets: Service and Repair
Seal-Halfshaft Left Side
Removal
REMOVAL
1. Remove halfshaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Half Shaft - Removal.
2. Remove left side differential oil seal.
Installation
INSTALLATION
1. Install the left side differential oil seal using Installer 9871 (2) and Handle C-4171 (3).
2. Install halfshaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Half Shaft - Installation.
3. Road test vehicle and inspect for leaks.
