Caliber L4-2.0L (2008)
Shifter CVT: Service and Repair
Removal
REMOVAL
1. Remove shift knob and shift bezel.See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Console Shifter Bezel - Removal
See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Console Shifter Bezel - Removal
2. Remove two screws (1).
3. Pull on side of housing (1) and unsnap housing tabs.
4. Disconnect console housing wire connector (2) and instrument panel connector (3).
5. Remove from vehicle.