dodge Workshop Repair Guides

Dodge Caliber L4-20L Workshop Service and Auto Repair Manuals

Thermostat, Engine Cooling|Description|Page 2653 > < Thermostat, Engine Cooling|Description
Page 1
background image

Thermostat: Description and Operation
Operation

OPERATION

When the Engine is cold and both the primary and secondary thermostats are closed. The coolant will circulate through the engine, heater system, and the
bypass. The cooling system has no flow through the radiator

As the engine warms up, the primary thermostat will start to open at 82° C (179° F). Coolant will start to flow through the radiator oil cooler and
transmission cooler. Coolant will flow through the transmission oil cooler only when the primary thermostat is fully open. The primary thermostat will
fully open at 95° C (203° F).

The secondary thermostat will start to open at 95° C (203° F). This will increase the coolant flow through the cylinder block and cylinder head and the 
radiator. The secondary thermostat will fully open at 110° C (230° F).

If the thermostat is stuck open or allows coolant leakage through it, the engine will not operate at the proper temperature for obtaining engine fuel
efficiency, performance and emissions levels. If this condition occurs, a diagnostic trouble code will be set and a MIL light will be turned on. Refer to
the Powertrain Diagnostic Procedures for further information and diagnostics provided.

Thermostat, Engine Cooling|Description|Page 2653 > < Thermostat, Engine Cooling|Description