Caliber L4-2.0L VIN B (2007)
Engine Mount: Service and Repair
Front Mount
Removal
REMOVAL
1. Raise vehicle.
2. Remove fore aft member (3) to mount (4) bolts.
3. Remove mount through bolt (1).
4. Remove fore aft member (3) mounting bolts and remove.
5. Remove front mount (4).
Installation
INSTALLATION
1. Position mount (4) and torque bolts to 47 Nm (35 ft. lbs.).
2. Install fore aft member (3) and torque bolts to 100 Nm (74 ft. lbs.).
3. Install mount through bolt (1) and torque to 47 Nm (35 ft. lbs.).
4. Lower vehicle.