Caliber L4-2.0L VIN B (2007)
NOTE: LHD model shown. RHD model similar.
9. Remove the center floor console.
10. Remove the front seat from the side of the vehicle being serviced.
11. Pull the carpet back to gain access to the rear seat floor duct (2).
12. Remove the screw (1) and disengage the retainer that secures the rear seat floor duct to the floor support (4).
13. Disconnect the rear seat floor duct from the rear floor distribution duct (3) and remove the rear seat duct(s).
Installation
INSTALLATION
RIGHT FRONT FLOOR DUCT
