Caliber L4-2.0L VIN B (2007)
5. Remove the bolt (1) that secures the A/C liquid and suction line assembly (2) to the A/C evaporator (3).
6. Disconnect the A/C liquid and suction line assembly from the A/C evaporator and remove and discard the dual-plane seals.
7. Install plugs in, or tape over the opened refrigerant line fittings and the evaporator ports.
8. Disconnect the heater hoses (4) from the heater core tubes. Install plugs in, or tape over the opened heater core tubes to prevent coolant spillage
during housing removal.
NOTE: Make sure to remove the five bolts that secure the HVAC housing to the instrument panel support prior to removing the instrument panel
from the vehicle.
9. Remove the instrument panel.
10. Remove the rear floor ducts.
11. Remove the condensation drain tube.
12. Remove the nut (1) that secures the passenger side of the HVAC housing (2) to the dash panel (3).