Caliber L4-2.0L VIN B (2007)
Refrigerator: All Technical Service Bulletins
Accessories - Chill Zone Does Not Stay Cold
NUMBER: 24-005-06 REV. A
GROUP: Heating & Air Conditioning
DATE: September 14, 2006
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 24-005-06, DATED JUNE 14, 2006, WHICH SHOULD BE REMOVED
FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES A NEW VEHICLE BUILD DATE.
SUBJECT:
Chill Zone Does Not Stay Cold Or Chill Zone Mode Door Does Not Stay In Position
OVERVIEW:
This bulletin involves applying a piece of sticky back foam tape to the chill zone mode door.
NOTE:
For detail Chill Zone operating information consult the Owner Manual.
MODELS:
2007
(PM)
Caliber
NOTE:
**This bulletin applies to vehicles built on or before August 20, 2006 (MDH 0820XX).**
SYMPTOM/CONDITION:
The customer may describe that chill zone does not stay cold or that the chill zone mode door does not stay in position.
DIAGNOSIS:
If the vehicle exhibits the symptom/condition listed above perform the Repair Procedure.
PARTS REQUIRED:
SPECIAL TOOLS / EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
Open door.
2.
Open glove box.
3.
Using trim stick (C-4755) remove the chill zone mode door.
