Caliber L4-2.0L VIN B (2007)
Combination Switch: Service and Repair
Installation
INSTALLATION
1. Position the left multi-function switch in the slot in the back of the clockspring (1) and connect the switch connector (3).
2. Connect the instrument panel wiring harness connector to the back of the left multi-function switch.
3. Align switch (3) with the clockspring (1) and slide toward steering column.
4. Install the screw (2) that secures the switch (3) to the clockspring (1).
5. Install the upper and lower shrouds onto the steering column.
6. Connect the battery negative cable.
