Caliber L4-2.0L VIN B (2007)
Seat Belt Retractor: Service and Repair
Front Seat Belt Retractor
Removal
REMOVAL
WARNING: Due to the integral tensioners, the front seat belt retractor assemblies must be replaced following a collision where the airbags
were deployed.
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
2. Using a trim stick or equivalent, gently pry off the trim cover (1) to the retractor lower anchor bolt (2).
3. Remove the lower anchor bolt (2).
4. Using a trim stick or equivalent, gently pry off the plastic turning loop cover (2) from the height adjuster (1).
