Caliber L4-2.0L VIN B (2007)
8. Remove the wheel mounting nuts (3), then the front tire and wheel assembly (1).
CAUTION: The strut clevis-to-knuckle attaching bolt shanks are serrated and must not be turned during removal. Remove the nuts while
holding the bolts stationary, then tap the bolts out using a punch.
9. Remove the original upper bolt (1) and nut (3) attaching the strut clevis bracket (2) to the knuckle (5).
10. Install a bolt from the adjustment package into the hole where the original bolt was removed. Install the bolt as indicated.
11. Install a nut provided in adjustment package on the replacement bolt. Tighten the nut until it's snug, but still allows the knuckle to slide in the
clevis bracket.
