Caliber L4-2.0L VIN B (2007)
Suspension Strut / Shock Absorber: Service and Repair
Front Strut / Shock
Removal
REMOVAL
NOTE: Before proceeding, refer to FRONT SUSPENSION WARNING.
1. Raise and support the vehicle.
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
NOTE: If both strut assemblies are to be removed, mark the strut assemblies right or left and keep the parts separated to avoid mix-up.
Not all parts of the strut assembly are interchangeable side-to-side.
3. Remove the screw (1) securing the flex hose (2) routing bracket to the strut (6).