Dodge Workshop Service and Repair Manuals > Caliber L4-2.0L VIN B (2007) > Transmission and Drivetrain | Continuously Variable Transmission/Transaxle, CVT | Seals and Gaskets, CVT | Component Information | Service and Repair

Page 1

Seals and Gaskets: Service and Repair
Seal-Torque Converter

Removal

REMOVAL

1. Remove transmission.

2. Remove torque converter.
3. Remove torque converter seal using Slide Hammer C-3752 and oil Seal Remover 9667.

Installation

INSTALLATION

1. Install torque converter seal using oil seal Installer 9858.

Dodge Workshop Service and Repair Manuals