Caliber L4-2.4L (2009)
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Remove the cargo floor cover.
2. Remove the rear floor pan silencer (1).
3. If equipped, remove the nuts mounting the satellite receiver (1) or amplifier (2) to rear floor pan. Move the component aside to allow access to the
wheel speed sensor wiring connector through the opening in bottom of the quarter trim panel.
4. Through the opening in the bottom of the quarter trim panel, disconnect the wheel speed sensor cable connector (2) at the body wiring harness
connector (3).