Caliber L4-2.4L (2009)
5. Using a Brake Shoe Gauge C-3919 (1) or equivalent, measure the inside diameter of the brake drum at the center of the shoe contact area. Tighten
the Gauge setscrew at this measurement.
6. Place the opposite side of the brake shoe gauge (2) over the brake shoes (1) as shown.
7. Adjust the shoe diameter to the setting on the gauge. To adjust the shoe diameter, turn the adjuster wheel using a screwdriver inserted through the
adjusting hole in the rear of the shoe support plate. Once the tip of the screwdriver contacts the adjuster wheel teeth, move the handle of tool
upward using the support plate as a pivot to adjust the shoes outward.
