Caliber L4-2.4L (2009)
8. Install oil pan drain plug (2) and tighten drain plug to 28 Nm (20 ft. lbs.).
9. Install new oil filter (1)See: Removal and Replacement/Engine Oil Filter - Installation.
10. Lower vehicle and fill crankcase with specified type and amount of engine oil and .
11. Install oil fill cap.
12. Start engine and inspect for leaks.
13. Stop engine and inspect oil level.
OIL FILTER SPECIFICATION
All engines are equipped with a high quality full-flow, disposable type oil filter. Replace oil filter with a Mopar(R) or the equivalent.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING listed above.