Dodge Workshop Service and Repair Manuals > Caliber L4-2.4L (2009) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Solenoid | Component Information | Service and Repair | Variable Valve Timing Solenoid - Removal

Page 1

Variable Valve Timing Solenoid: Service and Repair
Variable Valve Timing Solenoid - Installation

Front Solenoid 1/1

FRONT SOLENOID 1/1

1. Solenoid for front location 1/1. Note mounting tab location is different between front and rear solenoids.

2. Install solenoid into cylinder head.
3. Install mounting bolt and tighten to 12 Nm (9 ft. lbs.).

4. Install oil pressure sensor.

Dodge Workshop Service and Repair Manuals