Caliber L4-2.4L (2009)
Backup Lamp Switch: Service and Repair
Backup Lamp Switch - Removal
REMOVAL
1. Lift vehicle on hoist.
2. From bottom side of vehicle, disconnect back-up lamp switch connector (2).
3. Unscrew switch (2) from transaxle.
Backup Lamp Switch: Service and Repair
Backup Lamp Switch - Removal
REMOVAL
1. Lift vehicle on hoist.
2. From bottom side of vehicle, disconnect back-up lamp switch connector (2).
3. Unscrew switch (2) from transaxle.