Caliber L4-2.4L (2009)
Fog/Driving Lamp Switch: Service and Repair
Left Multifunction Switch - Removal
REMOVAL
NOTE: It is not necessary to remove the Steering Column Control Module (SCCM) from the steering column to replace the left
multi-function switch (2).
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag or steering column components.
2. Remove both the upper and lower shrouds from the steering column See: Steering and Suspension/Steering/Steering Column/Steering Column
Cover/Service and Repair/Steering Column Shroud - Removal.
3. Remove the one screw (2) that secures the left multi-function switch (3) on the right side of the clockspring (1).
