Caliber L4-2.4L (2009)
5. Install the heat shield (3) with one nut (1) and two heat shield retaining bolts (2).
6. Install the upstream O2 sensor wire harness retainer (1) and crankshaft position sensor wire harness retainer (2) to the heat shield (3).
7. Install the air cleaner body (1) See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service
and Repair/Air Cleaner Body - Installation
8. Connect the negative battery cable.
9. Install the engine cover (1).