Caliber L4-2.4L (2009)
NOTE: Before proceeding, See: Service Precautions .
1. Remove the engine appearance cover.
2. Remove the coolant recovery bottle. See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and Repair/Coolant Recovery
Bottle - Removal
3. Siphon as much fluid as possible from the power steering fluid reservoir.
4. Remove the power steering fluid reservoir.See: Power Steering Fluid Reservoir/Service and Repair/Reservoir, Power Steering Pump - Removal
5. Remove the windshield washer reservoir.See: Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer
Reservoir - Removal
6. Remove the front fascia. See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia -
Removal
7. Remove the right headlamp. See: Lighting and Horns/Service and Repair/Front Lamp Unit - Removal
8. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
9. Remove the return hose (1) at the return tube (2).
10. Remove the return hose routing clamp screw (2) securing the return hose (7) to the frame rail.
11. Lower the vehicle.
12. Remove the return hose routing clamp screw (1) securing the return hose (7) to the strut tower.
13. Remove the hose clamps (6) securing the return hose to the power steering reservoir and cooler. Slide the hose off the end of the cooler tube.
14. Remove the return hose from the vehicle.
Supply Hose
GAS ENGINE
NOTE: Before proceeding, See: Service Precautions .
