Caliber L4-2.4L (2009)
8. Install a NEW ball joint stud pinch bolt (4) and nut (5). Tighten the nut to 82 Nm (60 ft. lbs.).
9. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
10. Lower the vehicle.
11. Perform wheel alignment as necessary. See: Alignment/Service and Repair
Rear Upper Control Arm - Removal
REMOVAL
1. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).