Caliber L4-2.4L (2009)
3. Remove the nut (4) and bolt (3) securing the upper control arm (1) to the trailing link.
4. Remove the bolt (2) securing the upper control arm (1) to the crossmember.
5. Remove the upper control arm (1).
Rear Upper Control Arm - Installation
INSTALLATION
1. Position the upper control arm (1) and install the bolt (2) securing the arm to the crossmember. Do not tighten at this time.
2. Install the bolt (3) and nut (4) securing the upper control arm (1) to the trailing link. Do not tighten at this time.
3. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
