Caliber L4-2.4L (2009)
4. Remove the nut (1) securing the brake tube routing bracket to the trailing link.
5. Remove the brake tube (3) from the routing clip (2) on the trailing link.
6. Remove the two bolts (1) securing disc brake caliper adapter (3) to the brake support plate (4).
7. Remove the disc brake caliper (2) and adapter (3) as an assembly. Hang the assembly out of the way using wire or a bungee cord. Use care not to
overextend the brake hose and tubing when doing this.
8. If equipped, remove the screw (4) fastening the wheel speed sensor (3) to the trailing link (2).
9. If equipped, remove the routing clip (1) fastening the wheel speed sensor (3) to the trailing link (2).
10. Remove the brake rotor, then hub and bearing. See: Wheel Bearing/Service and Repair/Rear Hub and Bearing - Removal
11. Remove the parking brake cable from the lever on the parking brake shoe.
