Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
Refrigerator: Customer Interest
Accessories - Chill Zone Won't Stay Cold
NUMBER: 24-005-07
GROUP: Heating & Air Conditioning
DATE: July 19,2007
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 24-005-06 REV. A, DATED SEPTEMBER 14, 2006, WHICH SHOULD BE
REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES 2008
MODELS AND REMOVAL OF CLEAN POINTS.
SUBJECT:
Chill Zone Does Not Stay Cold Or Mode Door Does Not Stay In Position
OVERVIEW:
This bulletin involves applying a piece of sticky back foam tape to the chill zone mode door.
NOTE:
For detailed Chill Zone operating information consult the Owner Manual.
MODELS:
**2007-
(PM)
Caliber
2008**
SYMPTOM/CONDITION:
The customer may describe that chill zone does not stay cold or that the chill zone mode door does not stay in position.
DIAGNOSIS:
If the vehicle exhibits the symptom/condition listed above perform the Repair Procedure.
PARTS REQUIRED:
SPECIAL TOOLS / EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
1.
Open door.
2.
Open glove box.
3.
Using trim stick (C-4755) remove the chill zone mode door.