Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
9. Position the stabilizer bar (2) back into place and install the bushing bolts (1).
10. Tighten the bolts to 61 Nm (45 ft. lbs.).
11. Position the power steering lines back into place and install the support bracket (2) bolts (1).
12. Tighten the bolts to 8 Nm (70 ft. lbs.).
13. Connect the lower ball joint stud (6) to the knuckle (3).
14. Install a NEW ball joint stud pinch bolt (4) and nut (5). Tighten the nut to 82 Nm (60 ft. lbs.).
