Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
10. Insert the upper tips of the brake shoes into the grooves of the wheel cylinder (1) pistons.
11. Position the bottom of the front shoe against the anchor pin (5).
12. Install a shoe hold-down pin from the rear, through the support plate and the front shoe.
13. Compress and install the hold-down spring (2) retaining the front shoe to the support plate.
14. Compress the parking brake cable return spring, then carefully install the cable onto the parking brake lever. Release the spring guiding it beneath
the retaining tab on the lever.
