Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
11. Install the rear floor pan silencer (1).
12. Install the cargo floor cover.
13. Perform the Diagnostic Verification Test and clear any faults. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests
Installation - FWD
FRONT-WHEEL-DRIVE
1. Install the wheel speed sensor head (3) into the rear of the hub and bearing (2).
2. Install the wheel speed sensor head mounting screw (1). Tighten the screw to 10 Nm (89 in. lbs.).
