Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
4. Tighten the connecting rod bolts using the 2 step torque-turn method. Tighten according to the following values:
CAUTION: Do not use a torque wrench for the second step.
-
Tighten the bolts to 27 Nm (20 ft. lbs.).
-
Tighten the connecting rod bolts an additional 90°.
5. Using a feeler gauge, check connecting rod side clearance. Refer to clearance specifications Refer to ENGINE - SPECIFICATIONS.
