Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
31. Remove engine from repair stand and position on dolly 6135 (8) and engine support cradle 6710 (2, 11). Install safety straps (5, 9) around the
engine to cradle and tighten and lock them into position.
32. Install crankshaft rear oil seal.
33. Install drive plate/flex plate using new bolts. Tighten bolts to 95 Nm (70 ft. lbs.).
34. Attach transaxle to engine. Tighten bellhousing bolts to 101 Nm (75 ft. lbs.).
35. Install the engine assembly.
36. Install new oil filter (1) and fill with oil.
37. Fill with coolant.
38. Start engine and check for leaks.
39. Install engine cover.