Caliber SRT-4 L4-2.4L Turbo VIN F (2007)
a.
Squeeze a dab of grease the size of a nickel between the driver side right outboard lower rail and the right outboard upper rail of the seat
track (Fig. 1).
b.
Squeeze a dab of grease the size of a nickel between the driver side left outboard lower rail and the left outboard upper rail of the seat track
(Fig. 1).
4.
Move the seat back and forth a few times to distribute the grease along the track.
5.
Repeat steps 4 and 5 for the passenger seat.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
